Quick verdict
Crown 190 Sheffield Rip Saw favors fast, resharpenable ripping and value, while Lynx 26-Inch Rip Saw gives longer reach and a slightly higher overall score; Lynx is the marginal overall pick.
Also check similar comparisons:
- Crown 190 Sheffield Rip Saw vs. Disston D8 26-inch Rip Saw
- Lynx 26-Inch Rip Saw vs. Disston D8 26-inch Rip Saw
At-a-glance specs
Feature | Sheffield Rip Saw — Crown 190 | Lynx 26-Inch Rip Saw |
|---|---|---|
Blade length | 24 in (61 cm) | 26 in (66 cm) |
TPI / PPI | 4.5 TPI | 4.5 TPI |
Blade material | High-carbon carbon steel (resharpenable) | Alloy spring steel (listed as alloy steel) |
Handle type and material | Stained beech handle, secured with screws | Western style pistol grip, stained European beech with brass button screws |
Tooth rake angle | 5°-8° typical | 5°-8° typical |
Blade thickness | Approximately 0.032-0.035 inches (0.81-0.89 mm) | Approximately 0.032-0.035 inches (0.81-0.89 mm), taper ground |
Kerf width | Typical for Rip Saws: 0.045 inch (1.143 mm) | Typical for Rip Saws: 0.045 inch (1.143 mm) |
Steel hardness / grade | High-carbon carbon steel | Alloy spring steel |
Note: We don’t test products ourselves. We review user feedback and/or community discussions to recommend top options with their necessary information. This info can be susceptible to misinterpretation.
Rip Cutting Performance
- Sheffield Rip Saw — Crown 190: Fast, coarse 4.5 TPI blade for aggressive long grain ripping.
- Lynx 26-Inch Rip Saw: Fast rip cutting with longer 26 in blade for greater reach.
Teeth and TPI
- Sheffield Rip Saw — Crown 190: 4.5 TPI coarse teeth, aggressive but not for fine work.
- Lynx 26-Inch Rip Saw: 4.5 TPI coarse teeth, filed for rip cutting and fast once set.
Handle Fit
- Sheffield Rip Saw — Crown 190: Stained beech handle described as comfortable and balanced.
- Lynx 26-Inch Rip Saw: Western pistol grip in European beech, may need reshaping or fitting.
Tuning and Setup
- Sheffield Rip Saw — Crown 190: Many users remove lacquer and tune teeth for best tracking.
- Lynx 26-Inch Rip Saw: Often needs truing, tooth setting, and handle fitting before peak performance.
Value and Durability
- Sheffield Rip Saw — Crown 190: Resharpenable high-carbon blade with solid Sheffield build at modest price.
- Lynx 26-Inch Rip Saw: Alloy spring steel blade gives durable edge retention and good value after tuning.
Scores snapshot
Feature | Sheffield Rip Saw — Crown 190 | Lynx 26-Inch Rip Saw |
|---|---|---|
Blade length (1-10) | 6 | 10 |
TPI (1-10) | 10 | 10 |
Tooth rake angle (1-10) | 4 | 3 |
Blade thickness (1-10) | 9 | 9 |
Kerf width (1-10) | 5 | 5 |
Steel hardness / grade (1-10) | 10 | 8 |
Overall Score | 7.3/10 | 7.5/10 |
Who should buy which?
Buy Sheffield Rip Saw — Crown 190 if you:
- You want aggressive, fast ripping with a resharpenable blade.
- You value traditional Sheffield build at a modest price.
- You prefer a comfortable wooden handle for controlled strokes.
Buy Lynx 26-Inch Rip Saw if you:
- You need a longer 26 in blade for reach and long rip cuts.
- You can true the blade and set teeth for best performance.
- You want durable alloy spring steel that holds an edge.
Don’t buy either if you:
- You need fine, precise crosscuts or finish work.
- You will not tune or set the saw before use.
Final verdict
- Choose Lynx 26-Inch Rip Saw for longer reach and a slightly higher overall score.
- Both saws excel at fast rip cutting but require tuning; Crown 190 offers a resharpenable high-carbon blade and solid value.
The Grain Bros was started to serve woodworkers who can’t find products for their specific use case. We found out that there are not many media outlets extensively covering this topic. That’s why, we are here, to do the research and find the perfect products for your next DIY project. So you don’t have to juggle your tools and laptop at the same time.
If you see any kind of mistake in our content, make sure to reach out to us.
Any images we use in our content can be AI generated, and are for illustration only, in order to make you understand our point better.